ai.onnx.preview.training - Gradient#
Gradient - 1 (ai.onnx.preview.training)#
Version
name: Gradient (GitHub)
domain: ai.onnx.preview.training
since_version: 1
function: False
support_level: SupportType.COMMON
shape inference: False
This version of the operator has been available since version 1 of domain ai.onnx.preview.training.
Summary
Gradient operator computes the partial derivatives of a specific tensor w.r.t. some other tensors. This operator is widely used in gradient-based training algorithms. To illustrate its use, let’s consider a computation graph,
X -----.
|
v
W --> Conv --> H --> Gemm --> Y
^
|
Z
, where W and Z are trainable tensors. Note that operators’ attributes are omitted for the sake of simplicity. Let dY/dW (dY/dZ) be the gradient of Y with respect to W (Z). The user can compute gradient by inserting Gradient operator to form another graph shown below.
W --> Conv --> H --> Gemm --> Y
| ^ ^
| | |
| X Z
| | |
| | .----------'
| | | (W/Z/X is the 1st/2nd/3rd input of Gradient as shown in
| | | "xs" followed by "zs")
| v v
'---> Gradient(xs=["W", "Z"], zs=["X"], y="Y")
| |
| '-----------------------------------> dY/dW (1st output of Gradient)
|
'---------------------------------------> dY/dZ (2nd output of Gradient)
By definition, the tensor “y” is a function of independent variables in “xs” and “zs”. Since we only compute the gradient of “y” w.r.t. the differentiable variables in “xs”, this Gradient only outputs dY/dW and dY/dZ. Note that “H” cannot appear in “xs” and “zs”. The reason is that “H” can be determined by tensors “W” and “X” and therefore “H” is not an independent variable.
All outputs are optional. If needed, for example, user can assign an empty string to the 1st output name of that Gradient to skip the generation of dY/dW. Note that the concept of optional outputs can also be found in ONNX’s RNN, GRU, and LSTM.
Gradient operator can compute derivative against intermediate tensors. For example, the gradient of Y with respect to H can be done via
W --> Conv --> H --> Gemm --> Y
^ | ^
| | |
X | Z
.-------' |
| .----------'
| | (H/Z is the 1st/2nd input of Gradient as shown in "xs")
v v
Gradient(xs=["H", "Z"], y="Y")
| |
| '-----------------------------------> dY/dH (1st output of Gradient)
|
'---------------------------------------> dY/dZ (2nd output of Gradient)
It is possible to represent high-order differentiation using Gradient operators. For example, given the following linear model:
W --> Gemm --> Y --> Loss --> O
^ ^
| |
X L
To compute the 2nd order derivative of O with respect to W (denoted by d^2O/dW^2), one can do
W --> Gemm --> Y --> Loss --> O
| ^ ^
| | |
| X .------------L
| | | |
| | | v
+------+-+> Gradient(xs=["X", "W"], zs=["L"], y="O") ---> dO/dX (1st output of Gradient)
| | | |
| | | '---> dO/dW (2nd output of Gradient)
| v v
'---> Gradient(xs=["X", "W"], zs=["L"], y="dO/dW") ---> d(dO/dW)dX (1st output of
| Gradient)
|
|
'---> d^2O/dW^2 (2nd output of Gradient)
The tensors named in attributes “xs”, “zs”, and “y” define the differentiated computation graph, and the inputs to Gradient node define the values at which the gradient is computed. We can feed different tensors to the identified graph. For example, one can compute the gradient of Y with respect to H at a specific value of H, H_1, by providing that value as an input to the Gradient node.
W --> Conv --> H --> Gemm --> Y
^ ^
| |
X Z
Z_1 (2nd input of Gradient)
|
v
H_1 --> Gradient(xs=["H", "Z"], y="Y") ---> dY/dH when H = H_1 and Y = Y_1.
|
'------------------------------> dY/dZ (2nd output of Gradient)
When the inputs of Gradient are the tensors named in “xs” and “zs”, the computation can be optimized. More specifically, intermediate variables in forward pass can be reused if the gradient is computed via reverse-mode auto-differentiation.
Attributes
xs (required): Input tensor names of the differentiated sub-graph. It contains only the necessary differentiated inputs of a (sub-)graph. Variables (usually called intermediate variables) that can be generated from inputs cannot be included in this attribute.
y (required): The targeted tensor. It can be viewed as the output of the differentiated function. The attribute “xs” and attribute “zs” are the minimal independent variable set that determines the value of “y”.
zs: Input tensor names of the differentiated sub-graph. It contains only the necessary non-differentiated inputs of a (sub-)graph. Variables (usually called intermediate variables) that can be generated from inputs cannot be included in this attribute.
Inputs
Between 1 and 2147483647 inputs.
Inputs (variadic) - T1: The values fed into graph identified by the attributes. The i-th input is the value of the i-th tensor specified in the concatenated list of the attribute “xs” and the attribute “zs”. For example, if xs=[“A”, “B”] and zs=[“C”], the first input is used as the value of symbol “A” and the 3rd input is substituted for all the occurrences of “C”.
Outputs
Between 1 and 2147483647 outputs.
Outputs (variadic) - T2: The gradient of the tensor specified by the attribute “y” with respect to each of tensors specified in the attribute “xs”. The i-th output is the gradient of “y” with respect to the i-th tensor specified in the attribute “xs”.
Type Constraints
T1 in ( tensor(bool), tensor(complex128), tensor(complex64), tensor(double), tensor(float), tensor(float16), tensor(int16), tensor(int32), tensor(int64), tensor(int8), tensor(string), tensor(uint16), tensor(uint32), tensor(uint64), tensor(uint8) ): Allow outputs to be any kind of tensor.
T2 in ( tensor(double), tensor(float), tensor(float16) ): Allow inputs to be any kind of floating-point tensor.
Examples